ADDRESSABLE SECURITY SYSTEMS
Digiplex and Digiplex EVO systems provide the highest level of protection for banks, high-security military and government sites, luxurious residential homes and any place where maximum security is essential. These systems are designed to be easy to use and the modular concept of these systems provides installers with labour-saving features that make expanding, installing and servicing these systems quick and convenient.
Expand your system by adding plug-and-play expansion modules anywhere and in any combination on the 4-wire combus. Modules are connected to the combus at the most convenient location and then their zone inputs are assigned to the desired zone and partition. Also, only a module’s used inputs are assigned to zones in the system. Keyswitches, remote controls and unused module inputs do not use up zones. Once installed, all combus modules, including motion detectors, can be programmed remotely via a keypad or the WinLoad Installer Upload/Download software.
Digiplex and Digiplex EVO integrate access control solutions. Your alarm system user database can be used to manage the access to up to 32 doors, and the monitoring of these doors can be included in any partitions. You can also use Winload and NEware to manage users and access permissions. By merging security and access control, the Digiplex and Digiplex EVO increase the level of protection offered by security systems to a new level.
DIGIPLEX Main Control Panels
DGP-848/DGP-96NE & EVO48/EVO192
48/96-Zone & 48/192-Zone Control Panels
| Common Features |
| - 8 On-Board Zones (16 with ATZ) |
| - Built-in Access Control Features |
| - EVO Series: Supports GSM Module (PCS100), IP Module (IP100) and Voice Module (VDMP3) |
| - In-field firmware upgrade via 307USBand WinLoad |
| - Compatible with NEware V4.0 or higher |
| - Automatic Daylight Savings Time feature |
| - PGM1 can be used as a 2-wire smoke input |
| - Program remote controls using the master or installer codes |
| - Built-in real-time clock backup battery |
| - 1.7A switching power supply |
| - 1 supervised bell output, auxiliary output and telephone line |
| - Push button software reset (reset to default values and restart) |
| - Push button to activate or deactivate the Auxiliary output |
| - Fits in a 28cm x 28cm x 7.6cm metal box |
| - The EVO series share the same programming for easy panel substitution |
|
Feature |
DGP-848/EVO48 |
DGP-96NE/EVO192 |
|
Maximum Zones |
48 |
96/192 |
|
PGMs |
125/250 |
250 (5 on board) |
|
Multibus |
- |
Yes |
|
User Codes |
96 |
999 |
|
Partitions |
4 |
8 |
|
Events Buffered |
1024 |
2048 |
|
Expansion Modules |
127 |
254 |
|
Remote Controls |
96 (w/RTX3) |
999 (w/RTX3) | |
DIGIPLEX Main Keypads
DGP2-641/EVO641
32-Character Blue LCD Keypad Module
 
| Features |
| - Zone alarm display: The zones in alarm are shown until the system is disarmed |
| - In-field firmware upgradeable via a CONV4USBand WinLoad |
| - Simplified end-user remote control programming |
| - Supports DGP-848, EVO96, EVO48 and EVO192 |
| - 32-character blue LCD with programmable labels (via Memory Key, Winload, NEware or Module Broadcast feature) |
| - Available in English, French, Spanish, ... |
| - Assign to one or more partitions |
| - 1 addressable zone and 1 PGM output |
| - Independently set chime zones |
| - 14 one-touch action buttons |
| - 3 keypad-activated panic alarms |
| - Adjustable backlight, contrast and scroll speed |
| - Display time using the 12Hr or 24Hr format |
DGP2-641R/EVO641R
32-Character Blue LCD Keypad Module
with Integrated Card Reader
| Features |
| - Zone alarm display: the zones in alarm are shown until the system is disarmed |
| - In-field firmware upgradeable via a CONV4USBand WinLoad |
| - Simplified end-user remote control programming |
| - Supports DGP-848, EVO96, EVO48 and EVO192 |
| - 32-character blue LCD with programmable labels (via Memory Key, Winload, NEware or Module Broadcast feature) |
| - Available in English, French, Spanish, ... |
| - Assign to one or more partitions |
| - 1 addressable zone and 1 PGM output |
| - Independently set chime zones |
| - 14 one-touch action buttons |
| - 3 keypad-activated panic alarms |
| - Adjustable backlight, contrast and scroll speed |
| - Display time using the 12Hr or 24Hr format |
| - Built-in card reader. Just present access card directly to the keypad module |
| - Grant access via card and/or access code |
| - Arm and disarm with a card |
| - Door contact and request for exit inputs |
| - Door lock output |
| - Programmable automatic unlocking schedule |
| - Door Left Open and Door Forced Open alarms |
DGP2-648/BL
48-Zone LED Keypad Module/Blue
| Features |
| - 48-zone LED display (each LED can be set to display any zone number from 1 to 96) |
| - 4-partition LED display (each LED can be set to display any partition from 1 to 8) |
| - Assign to one or more partitions |
| - 1 addressable zone and 1 PGM output |
| - Independently set chime zones |
| - 14 one-touch action buttons |
| - 3 keypad-activated panic alarms |
DIGIPLEX Main Detectors
DGP2-50
Dual Element Motion Detector Module
| Features |
| - Patented Digital Motion Detection (no analogue circuitry) |
| - Digital Auto Pulse Signal Processing |
| - Digital Shield algorithm software |
| - Metal shield maximizes protection from EMI and RFI signals |
| - 12m X 12m Range with 110° Viewing Angle |
DGP2-70
High-Security Motion Detector Module
with Pet Immunity (40Kg) .jpg)
| Features |
| - Dual optics (2 dual opposed element sensors) |
| - Provides superior pet immunity using a patented combination of advanced optics and digital processing technologies |
| - Immune to pets weighing up to 40kg |
| - Extremely reliable and false-alarm free |
| - Patented Digital Motion Detection (no analogue circuitry) |
| - Digital Auto Pulse Signal Processing |
| - Digital Shield algorithm software |
| - Metal shield maximizes protection from EMI and RFI signals |
| -10.5m X 10.5m Range with 90° Viewing Angle |
DG85 Series
Outdoor High-Security Digital Motion Detector Module
with Pet Immunity (40Kg)
.jpg)
| Features |
| - Impact and temperature resistant casing (-35°C to 50°C) |
| - Patented Digital Motion Detection |
| - Extremely reliable and false-alarm free |
| - Dual Optical Filtering System |
| - UV protected lens with: IP67 |
| - Dual optics (2 dual opposed element sensors) |
| - Digital Dual Opposed Detection |
| - Multi-level sensitivity adjustment |
| - Two operational modes (Bus or Relay operation) |
| - Can be used with the Heavy Duty Outdoor Swivel Bracket (MG-SB85W) |
DG467
360° Ceiling Mounted Digital Motion Detector
.jpg) .jpg)
| Features |
| - Two operational modes (addressable for the Digiplex and EVO series or conventional relay operation) |
| - Dual opposed element sensor |
| - Digital Detection |
| - 7m x 6m at 2.4m |
| - 11m x 6m at 3.7m |
| - 360° viewing angle |
DG457
Glassbreak Bus Detector
.jpg) .jpg)
| Features |
| - Two operational modes (addressable for the Digiplex EVO series or conventional relay operation) |
| - Remote test mode when used with Test Trek V2 |
| - Full audio and infrasonic spectrum analysis |
| - 7 frequency digital filters, digital amplifier gain and frequency fluctuation assessment |
| - Impact and shock wave analysis |
| - High-immunity to RFI and EMI signals |
| - Adjustable sensitivity: covers up to 9m when set to high and up to 4.5m when set to low |
| - TestTrek (459) used for testing available separately |
| - Anti-tamper switch |
|
Hardwired Zone Expansion Modules
APR3-ZX4
4-Zone Expansion Module
|
Features |
|
- Add 4 Zones |
|
- Use zone input as an anti-tamper switch input |
|
- Auto-Panel Recognition | |
|
APR-ZX8
8-Zone Expansion Module
|
Features |
|
- Compatible with Spectra, MG5000/5050, Digiplex and EVO |
|
- Add 8 zones |
|
- 1 PGM output |
|
- Use zone input as an anti-tamper switch input | |
Wireless Zone Expansion Modules
MG-RCV3 or OMN-RCV3
Wireless Expansion Module
|
Features |
|
- Compatible with Esprit, Spectra Series, Digiplex |
|
- 16 wireless zones |
|
- 16 Remote controls |
- Supports MG-REM1 or OMN-RCT1 |
|
- In-field firmware upgradeable via CONV4USB and Winload |
|
- RF jamming supervision |
|
- Low battery, tamper and check-in supervision |
|
- Transmitter signal strength display |
|
- 3 PGM outputs and 1 optional output |
|
- Noise level test and indicator | |
MG-RTX3
Wireless Expansion Module
|
Features |
|
- Compatible with Esprit, Spectra, Digiplex and EVO |
|
- 32 wireless zones (Spectra SP and EVO only) |
|
- Remote controls (8 w/Esprit, 32 w/SP, 999 w/EVO) |
|
- Wireless PGMs (8 w/EVO, 16 w/SP) |
|
- Functions with all MAGELLAN transmitters including MG-2WPGM and MG-REM2 |
|
|
|
- In-field firmware upgradeable via CONV4USB and Winload |
|
- RF jamming supervision |
|
- Low battery, tamper and check-in supervision |
|
- Transmitter signal strength display |
|
- 3 PGM outputs and 1 optional output |
|
- Noise level test and indicator | |
PGMExpansion Modules
APR3-PGM4
4-PGM Expansion Module
|
Features |
|
- 4 fully programmable 5A relay outputs |
|
- Deactivate PGM after event or timer |
|
- Pulse PGM output for fire alarms |
Special Accessory Modules
APR3-ADM2
Voice-Assisted Arm/Disarm Module
|
Features |
|
- Arm, disarm, control on-board PGM and verify system status via telephone |
|
- Clear and concise voice prompts |
|
- 1 PGM output |
APR-PRT3
Printer Module
|
Features |
|
- Automatically/manually print reports of zones/systems event via printer and/or PC |
|
- In-field firmware upgradeable via a CONV4USB and WinLoad |
|
- Parallel and serial port for printer connections |
|
- Assign to one or more partitions |
|
- 2048 event buffer |
|
- Available in English, French, Spanish or Portuguese |
307USB
Direct Connect Interface
|
Features |
|
- Incorporates a USB port and a serial port (DB-9) |
|
- Enables control panel to communicate with a PC at 60m |
|
- Connect from the control panel’s serial port connector to a PC’s serial (DB-9) or USB port |
|
- Includes 3 LED status indicators (PC, Panel and RX/TX) |
|
- Communication speed:
- 57.6k baud (Magellan)
- 38.4k baud (EVO)
- 19.2k baud (DGP-848)
- 9.6k baud (MG series and Spectra SP series) |
APR3-HUB2
Hub and Bus Isolator
|
Features |
|
- Divide the bus into two completely isolated outputs (if one output fails, the other will continue to function) |
|
- One input port, 2 completely isolated output ports |
|
- Each output port provides communications up to 75m |
PMC5
Hand-Held Plug-in USB Memory Key
|
Features |
|
- Includes USB connector to download or upload system programming to or from a PC with WinLoad V4.0 or higher |
|
- Lock switch to prevent accidental loss of data |
|
- LED status indication |
|
- Download or upload control panel/console programming within seconds |
|
- Connect directly to memory connector on the control panel/console |
|
- No need for a telephone line, PC or any other peripheral device |
Ein-Azaitoon Co. - ASI |
SECURITY SYSTEMS
About PARADOX
